melt index
英 [melt ˈɪndeks]
美 [melt ˈɪndeks]
熔体指数；熔融指数
双语例句
- The temperature and press program of the thermal forming process was confirmed through determining Melt Index ( MI) of the CCPAEK at different temperatures.
通过不同温度下CCPAEK树脂熔融指数的测定，得到合适的热塑性复合材料成型温度及压力制度。 - Comparison of Thermodynamic Models in Design of Phase Change Materials Using Hydrated Molten Salts as Agents; Melt Index Prediction by BP Neural Networks Based on Canonical Correlation Analysis and Data Auto-regression
热力学模型在熔盐水合物相变储能材料设计中预测能力的比较研究基于典型相关分析和数据自回归处理的BP神经网络在聚丙烯熔融指数预报中的应用 - Prediction of Melt Index Based on Wavelet and LS-SVM
基于小波-最小二乘支持向量机的熔融指数预测 - A New Method of Melt Index Prediction of Propylene Polymerization Based on Improved ant Colony Optimization
基于改进蚁群优化算法的聚丙烯熔融指数预报新方法 - Research of Melt Index Prediction of Polypropylene Based on Wavelet Neural Networks
基于小波神经网络的聚丙烯熔融指数预测研究 - Finally, the relations between process variables and quality variables were analyzed by on line predicting of melt index and density.
最后运用所建立的模型进行流化床乙烯气相聚合过程操作条件的模型预测分析。 - Melt Index Prediction by BP Neural Networks Based on Canonical Correlation Analysis and Data Auto-regression
基于典型相关分析和数据自回归处理的BP神经网络在聚丙烯熔融指数预报中的应用 - Melt Index Prediction Based on Particle Swarm Optimization
基于粒子群优化算法的熔融指数预报 - Soft Sensor for Polypropylene Melt Index Based on Adaptive Kernel Partial Least Squares
基于AKPLS方法的聚丙烯熔融指数软测量 - Melt index ( MI) is the most important parameter in determining the polypropylene's grade.
熔融指数是工业聚丙烯生产中决定聚丙烯牌号最重要的指标。 - According to the result of melt index, the process property of polycarbonate was improved by introducing PCL.
熔融指数的测定结果表明，PCL的加入可以改善PC的加工性能； - This article emphatically studies the influence on ESCR of copolymer, melt index, yield strength, breaking strength, elongation percentage and electric property by VA. content in different EVA.
并重点研究了不同EVA中的VA含量对共聚物的ESCR以及熔体指数、屈服强度、断裂强度、伸长率和电性能等的影响。 - Contrast tests of the surface protection coating material for the flexible continuous sucker rod are conducted, including integration test of ageing property and tensile property, melt index test and corrosion behavior test.
鉴于此，选用柔性连续抽油杆表面防护涂层材料及相关材料进行了老化性能和拉伸性能的综合试验、熔融指数测定试验和腐蚀性能试验等多种对比试验研究。 - The melt index and ethylene content of clear PP resin for beverage bottles at home and abroad were analyzed.
剖析了国内外饮料瓶用透明聚丙烯熔体指数，乙烯含量。 - A study on MWD of PP by zero shear rate melt viscosity and the melt index
用熔体的零切粘度和熔融指数研究聚丙烯的分子量分布 - Some factors affecting melt strength are analysed such as polymer structure factors including melt index, long chain branching, comonomer type and molecular weight distribution and measuring conditions incorporating temperature, extrusion rate and draw distance.
分析了聚合物的结构因素包括熔体流动速率、长支链、共聚单体和相对分子质量分布以及测试条件包括温度、挤出速率和拉伸长度对熔体强度的影响。 - To be noticed, polypropylene with high melt index was still high in isotacticity.
该催化剂具有较好的氢调敏感性，在较高的熔体流动指数下聚丙烯仍具有较高的等规度； - The production process of high impact PP copolymer was introduced and the influences of melt index and content of bonded ethylene on copolymer's properties were discussed in this paper.
介绍了抗冲击聚丙烯的生产情况，详细论述了键合乙烯含量和熔体流动指数对产品性能的影响。 - For PEP copolymer with different melt indices, its dose of gelation increases with the melt index.
不同熔融指数FEP共聚物，辐射交联后，其凝胶化剂量随熔融指数增大而增高。 - The structure, melt index and crystallinity of matrix also have important effect for the blends thermal stability. The effect degree order are: LDPE> LLDPE> HDPE.
基体树脂的化学结构、熔融指数和结晶程度对煤/聚合物共混材料的热稳定性也有重要影响，其影响程度为：LDPE>LLDPE>HDPE。 - It investigated the influences of the content s of EVA and glycerol, and the lubricant to the mechanical properties, melt index and water resistance of the TPS/ EVA blends.
探讨了EVA、甘油的含量和润滑剂对TPS/EVA共混体系的力学性能、熔融流动性以及耐水性的影响。 - Experimental results show that grafting ratio and melt index of PP-g-MAH increase with increasing ultraviolet irradiation time;
用重量法计算了马来酸酐的接枝率。实验结果表明，接枝聚丙烯（PP-g-MAH）的熔体流动速率和马来酸酐的接枝率随紫外辐照时间的增加而增加； - The lower the melt index, the better the properties of the blend.
PP的熔融指数越小，共混体的性能越好。 - The melt index ( MI), heat distorsion temperature ( HDT), solvent resistance, thermal stability, mechanical properties and fracture morphologies were presented.
并对其熔融指数（MI）、热变形温度（HDT）、抗溶剂性、热稳定性、力学性能和破坏形态进行了研究。 - LLDPE is used widely and we selected a kind of blend as carried resin. The blend is made of high melt index LLDPE and LDPE and developed the using field of LLDPE.
LLDPE是一种被广泛使用的通用树脂，本文使用一种高熔融指数的LLDPE和LDPE共混作为色母粒的载体树脂，拓宽了LLDPE的使用范围。 - Reliable estimation of melt index ( MI) is crucial for the production of polypropylene.
可靠地预报熔融指数在聚丙烯生产过程中至关重要。 - Melt index is the most important indicator of quality in the production process of polypropylene.
熔融指数是聚丙烯生产过程中最重要的质量指标。 - As the most important quota in polypropylene production, the control and prediction of melt index is particularly important.
熔融指数（MeltIndex，MI）作为聚丙烯生产中最重要的指标，其控制和预报尤显重要。 - Melt index and resin density are very important properties in the production of large-scale polyethylene plant.
在大型聚乙烯工业装置生产中，熔融指数及密度是两个重要的质量指标。 - The best ratio of ABS/ PMMA blends was 90 to 10, obtained through the studies both on the splines 'performance of tensile property, impact strength, surface hardness and surface gloss and on blend particles' melt index in different ratios.
通过对不同配比样条的拉伸性能、冲击强度、表面硬度和表面光泽度的研究以及不同配比ABS/PMMA合金颗粒熔融指数的研究，确定ABS/PMMA共混体系的最佳配比为90∶10。